YM01D6型分切机（创口贴） YM01D6 type slitting machine (band-aid)
产品用途
Product Usage
用于卷筒无纺布、纸张、薄膜、创口贴（带膜）等分切成若干条，再复卷成盘，特别适用于
涨力要求较高的基材。
Used for winding non-woven fabrics, paper, film, band-aid (with film) and so on, cut into several strips, and then rewound into a disc, especially suitable
Tension requires a higher base material.
特点：
characteristic
1.选用剪切圆刀或气压式圆刀（选用）。
1.Choose shearing circular knife or pneumatic circular knife (optional)
2.一体式放卷机架，带磁粉制动器，全自动张力控制。
2.Integrated unwinding frame with magnetic powder brake and automatic tension control.
3.放卷带光电对边（EPC）和布边松紧调节装置。
3.Electro-optical edge (epc) and selvage tightness adjusting device for unwinding tape
4.收卷单轴摩擦中心双传动，带磁粉器锥度张力控制。
4.Winding single shaft friction center double drive, with taper tension control of magnetic powder device
5.传动变频器，数显计米带定长停机。
5.Drive frequency converter, digital display meter with fixed length stop
6.收放卷气胀轴，收卷悬臂架转出卸料。
6.Unwind and unwind the inflatable shaft, and the winding cantilever frame rotates out to discharge.
7.机架钢板结构，两侧罩壳表面喷塑。
7.Frame steel plate structure, with plastic spraying on the surfaces of both sides of the shell.
主要技术参数：
Main technical parameters
|
项目 project |
参数 parameter |
|
|
辊面幅宽（mm）Width of roll surface |
900~1300 |
1100~1900 |
|
分切宽度（mm）Cutting width |
≥10 |
≥20 |
|
放卷最大直径(mm) Maximum unwinding diameter |
Φ600~800 |
|
|
收卷最大直径(mm) Maximum winding diameter |
Φ400~600 |
|
|
设计车速(m/min) Design speed |
5~120 |
|
|
装机容量(kw) InstalledCapacity |
2~4 |
|
|
设备重量（kg）Equipment weight |
2000~4000 |
|
